CamperClean products for carefree holidays
Supply and disposal solutions
For campsites
For motorhome pitches
Marina & Yacht Harbours
Supply and disposal solutions for motorhomes
- The motorhome driver drives his vehicle over the grey water shaft (pos. 2) and positions it so that its drain valve is above the grey water shaft.
- The CamperClean station detects the motorhome via an integrated sensor system and initiates the pre-flushing of the grey water sump.
- The flushing nozzles pre-clean the grey water drain.
- The guest opens his grey water valve and empties his tank. This takes several minutes, depending on the size of the tank.
- While motorhome owners dispose of their grey water, they can have their faeces cassette emptied and cleaned fully automatically at the CamperClean station.
- After emptying, the guest continues to the fresh water dispenser to fill their fresh water tank.
- The sensor system integrated in the CamperClean Station recognises the departing vehicle and initiates the subsequent cleaning of the waste water shaft.
CC-NB series Electricity, fresh or grey water
The entire NB range has been tested to BS EN 60592: in 1992 by the British Standards Institute Environmental Laboratory and has IP65 rating against dust and water ingress.
Service bollard for electricity, fresh water, grey water etc.
Service bollard NB3 for electricity, fresh or grey water. Optional, drain with stainless steel flap. The drain is connected directly to the waste water system and allows grey water to be disposed of via a hose connection between the caravan and the drain via the spring flap. The drain is easy to maintain by opening the stainless steel flap.
Equipment variants:
- Lighting: Illuminated bollard head, 3W LED set with P12R photocell
- Heating system: Protection against frost and pipe bursts, with thermostats, self-regulating heating cable
- Drain: Drain, fully galvanised with stainless steel flap
- Stainless steel cladding: stainless steel housing
CC pitch service bollard Euro-bollard
Bollard housing
Our service bollards are available in various sizes and heights to meet your specific requirements. The inner housing consists of five key components that are firmly screwed together and are made of polyethylene.
Material selection
Our standard housings are made of UV and seawater resistant ABS and are available in the colours blue, black and ivory. Other ABS enclosures with a wood effect and fine finish are available in a wide range of colours.
Connection options
Single or three-phase connection possible, from 16-400A. IP44 or IP67 CEE sockets can be fitted in our range.
Lighting
In addition to the standard 2D 16W light source, an upgrade to a 3W LED cluster is also available. Both options are controlled via a P12R photocell. Battery-operated emergency lighting is also available.
Additional offer
In addition to our standard connections, we offer further options, such as water, TV and data outlets as a connection point to your existing TV and data network
CC-service bollard with payment system
Power supply for motorhome pitches
With just one main bollard, you can supply up to 12 pitches with power via a satellite bollard. The touch panel with control options for up to 12 CEE sockets is located on the main bollard. Of these, you can integrate 4 CEE sockets into the main bollard and control a further 8 CEE sockets in a satellite bollard.
Equipment:
- Innovative touch panel of the latest generation with up to 12 control outputs
- Extension with satellite bollards with between 1 and 4 sockets
- Main bollard with up to 4 integrated CEE sockets
- Payment system via RFID or coin
- Billing according to Kwh
Options:
- Standard colours: ivory, deep black, ocean blue, other colours on request
- Design: Golden-Oak housing made of ABS in wood design, Metal-Grey housing made of Dibond in grey with metallic effect or Woodland-Green housing in green
- Stainless steel cladding: stainless steel housing
- Foundation mounting plate, hot-dip galvanised
CC power supply bollard | CC-V-304-RP / -P / -F
CC disposal bollard for toilet cassettes from leisure vehicles and boats
The waste disposal bollard is characterised by its ease of use. It is operated via a pedal or a photocell. This prevents contact with contaminated surfaces as far as possible. The spout has been specially designed to prevent foreign bodies (usually waste) from getting in, which is an essential prerequisite for continuous use and low maintenance in public facilities. Each collection bowl is equipped with a tap that allows the toilet cassettes to be flushed out. On request, the bollards can be equipped with a heating system.
Disposal column CC-V-304
Disposal bollard for pull-out cassettes. Self-cleaning with 3 stainless steel nozzles that are activated via the pedal tap (V-304-RP), the photocell for vehicle detection (V-304-F) or the time-controlled push button (V-304-P). A tap for rinsing the cassette completes the equipment.
Equipment:
- Material, stainless steel AISI 304
- Protective flap with foot pedal operation
- Hose connection for cassette rinsing (does not replace a drinking water column)
- Water tap for tank rinsing ½”
- Power supply 230V / AC for V-304-P / -F
Optional equipment:
- CC-V-304-T Mounting frame
CC grey water shaft
Quick – Simple – Clean. That’s our motto. Of course, this also applies to our accessible grey water shafts.
Our accessible grey water sumps are made entirely of AISI 304 stainless steel. The special design of the drainage shafts allows motorhomes and coaches to drive over them without being damaged or deformed.
Options:
- Flushing system with integrated nozzles to prevent odours*
- Available in three sizes: 70 × 80 cm, 160 × 97 cm, 3,090 × 97 cm
- Eco frost protection system for use in sub-zero temperatures. Operation at low temperatures is guaranteed by the optional frost protection system.
The control electronics only release as much power as is necessary to prevent ice formation. This saves electricity and protects the environment*
